Ruckus GET 49cc Engine Stretch 9.5″ Extension w/ brake cable v3 DOORBUSTER

Black Friday Door Buster Sale only 2 available. If you see out of stock that mean someone got them before you.

TRS 9.5 Extension kit Version 3.  POWDER COATED GLOSS BLACK not painted.  FITS ALL NPS-50 2003 And Newer.  Version 3 now mounts to cross brace,  comes with beauty washers, and lighter deign.  NO drilling out nuts required. Still has same 3piece locking design so everything is trued. No welding or cutting required.  Shock Mount is shorter and has 2 positions to lower scooter more.

EVERY PIECE OF THIS IS MADE IN THE USA, Even the washers. We highly recommend a NCY SHOCK  OR LOW DOWN SHOCK when upgrading to this mount as the factory shock is too soft . We also advise to look into our airbox eliminator kit for this as the oem airbox will not fit.  Another great add would be the coolbox reservoir which sits higher on the bike for better clearance! Your stock coolant tank will hit. Many people get a coolbox or make their own.

Comes with all hardware, +6 Rear Brake line and 3 ft of Helix  Translucent Fuel line. Will work with stock wheel, 12×5 and 10×5 . Will not work with Fatty 12×8.

DOWNLOAD 9.5 PDF INSTRUCTIONS

Extra Installation Notes that does not apply to all : 

• If you are using stock handle bars you will need a 75″ CVK Throttle cable and +6 brake cable that comes with kit will work.
• If you using a lowboy shock with a stock tire you will need tighten pre-load and raise to highest setting by unscrewing the base. See picture below.
• If you are using a stock Coolant tank you will need to drill a hole 1/2 below existing hole on coolant bracket.

Here’s a Video on the install from Burnout Boddy