Tired of trying to figure out what throttle cable to use on your GY6 carb when you swap it into your Ruckus? You need this part! Don’t worry about having to hack up the GY6 cable bracket anymore to use your stock Honda Ruckus Throttle cable on your GY6 Carb!
This handy bracket positions the cable in JUST the right spot so that no mods are needed, just bolt this on, thread the cable into the cam wheel, then into the bracket, and tighten it up and you’re done! There is even JUUUUUST enough room to be able to leave the stock rubber cable protector on the stock cable***!
This is a great simple part for your swap that just makes life a little bit easier! 😉
***It is advised that if the rubber boot is too close to touching, that you may want to remove it. If the rubber boot gets caught on the cable and pulled inbetween the cable and the cam on the carb, it could create a slight up-throttle condition that can raise the idle enough to make the bike want to engage the clutch and keep the bike moving!