Adelin CNC levers for Drum / Disc Brake Square Master Cylinder w/ rear brake switch V2
In stock
$149.99
Adelin CNC levers for Drum / Disc Brake Square Master Cylinder w/ rear brake switch V2
CNC Billet Control CRG style levers DRILLED clutch lever to be used as Brake lever. Comes with Rear brake switch installed. Usually the customer had to do this but never does so we do it for you.. We drill threads out and open hole for our brake cables. Fits nice and flush.
Each Lever has been gone through and inspected, loc-Tite bolts, and tested. Limited Quantity Available. COMES IN BLACK OR SILVER.
Master Cylinder uses a 10mm Banjo Bolt Sold Separately Click on Links Below for bolts
- BLACK 10MM BANJO BOLT OR NCY BLEEDER10MM BANJO BOLT
- 90 DEGREE BANJO FITTING BLACK OR CHROME 90 DEGREE FITTING
You will also need a brake link color for link BLACK OR CHROME and for the Caliper you will need a STRAIGHT BANJO
If you have a NCY front end kit your existing cables and banjo parts will fit these levers same for TRS and RRGS Front end kits
| Weight | 2 lbs |
|---|---|
| Dimensions | 11 × 6 × 4 in |
| Color | Black, Silver |
Based on 0 reviews
Be the first to review “Adelin CNC levers for Drum / Disc Brake Square Master Cylinder w/ rear brake switch V2”
You may also like…
-
Accessories, Chassis, Gy6 150cc, Ruckus, Ruckus Gy6 Swap Parts, Suspension/ Brakes
Ruckus Adjustable Billet CNC Handlebar with Clip on bars MADE IN USA
Accessories, Chassis, Gy6 150cc, Ruckus, Ruckus Gy6 Swap Parts, Suspension/ BrakesRuckus Adjustable Billet CNC Handlebar with Clip on bars MADE IN USA
Billet Adjustable Handlebars with 31mm clip on bars included. THESE HAVE BEEN MACHINED TO FIT THE BATTERY BOX NOT LIKE OTHERS ON THE MARKET. Body Constructed out of SOLID Billet 6061 Aircraft Grade Aluminum Main Body is 1 piece for strength and safety see pictures. BARS ARE SOLID 6061 WITH ENDS OPEN FOR BAR MIRRORS Comes with Stainless hardware. Bolts onto the STOCK / OEM triple tree stem using factory bolt location for perfect centering. THESE WILL NOT WORK ON A MET OR MET RUCKS WITH OUR ADAPTER. THEY HIT PLASTICS ON METROPOLITAN. THESE ARE MADE HERE IN THE USA NOT CHINA.
- FEATURES:
- 7/8 bars adjustable to drag style or pull back and cruise
- adjustable bar length / bar tilt angle
- Completely made in USA with 6061 billet
- Bars are SOLID NOT hollow with ends drilled to accept bar end mirrors
ANODIZED BLACK OR RAW
SKU: BILLETBARS
There are no reviews yet.