Want a clean tank to go with your build. TRS has the solution for you! We have incorporated side steps and frame splitters. OUR tank allows you to bolt up to your Stock OEM Honda Ruckus Fuel Pump or if you have a GY6 swap you can bolt up a Mikuni Fuel with our Type 1 Coil! NO more making your own bracket. Our aluminum flat top gives you 1.375 gallons (the stock tank is 1.3 Gallons).
Complete bolt-on installation uses factory fuel pump, pressure tested, lines, gas cap, and cap are clocked the correct way.
As with all TRS Products, our Flat top tank is manufactured in-house, hand TIG-welded, leak tested, and proudly in the USA!
- Flat top Tank
- 3 Feet of Fuel Line
- 2 x SS M6x12mm Bolts (these are only for Stock OEM fuel Pump)
- 2 x SS M6X16mm (For Mukuni Fuel Pump) Mounting
- 2 x SS M6x25mm and 2 spacers for Gy6 Type 1 Coil Mounting
- 4 x SS M6 Washers
- 4x Beauty Washers with SS flat head bolts and nuts
We are offering the TRS Flat top Tank in RAW aluminum only (Will have small scratches on metal these are meant to be painted, powder-coated, polished, or sanded.
Shown Below is with GY6 Swap Mikuni Fuel pump and coil bracket. COIL, FUEL PUMPS, OR GAS CAP ARE NOT INCLUDED. MUST USE OEM GAS CAP YOU CAN USE EITHER PASSWORD CAP COVER OR REVOLVER CAP. IT WILL NOT WORK WITH OUR BOTTLE CAP GAS CAP
Bracket built-in for GY6 swap with Mikuni Fuel Pump and Type 1 coil
Shown below with OEM Honda Ruckus Fuel Pump, OEM FUEL PUMP OR GAS CAP ARE NOT INCLUDED
NOTE: In order to use the TRS Ruckus FLAT TOP Gas Tank, you must have an Engine Extension Kit Installed!