, , , ,

12×5 3 2 4/140 Ruckus Fatty Rim CUSTOM With Kymco Hub and Cap


Out of stock


Out of stock

Join the waitlist to be emailed when this product becomes available

PLEASE READ: The wheel Manufacture DWT aka Douglas, makes these wheels for ATV applications and they are SPUN 6061 .190 aluminum. These are NOT forged wheels and lips of the wheel may show some up and down movement. This is due to wheels being Hand Spun using a machine from DWT. We take EACH wheel and then placed on our in-house CNC machine to find center with both a CNC Probe and laser. WE DO THIS ON EVERY WHEEL THAT WE CUT A DESIGN INTO. We do not just put wheel in cnc machine and cut design like others. Each and every wheel has a different center since they are spun. Each wheel then gets lip edge polished since DWT just puts them in a box with NO protection and ships them to vendors. Wheels come with ends scratched some more than others. We polish front edge where it would lay on both sides, Rear on right side only. Why are our wheel more? We take the time to center the wheel before it’s cut, polish edge of wheel, and repack in protective foam.

 Douglas 12×5 3 2 Offset with 4/140 bolt pattern. Wheel is put on our CNC and holes are opened for 4/140 and center is opened so it fits flat on the Kymco Hub.
Polished Rim. Red Label
Must use an Kymco hub.  This wheel is for mainly used on the Honda Metropolitan. Custom made wheel Douglas stopped making these.

Must use an Kymco hub or similar. This wheel is for a GET motor. Will Require holes on wheel to be opened to M12 for Kymco Modified Hub to work. This is very easy using a step drill bit.

You will need a 120/70-12 tire

Weight 7 lbs
Dimensions 13 × 13 × 8 in

Based on 0 reviews

0.0 overall

Be the first to review “12×5 3 2 4/140 Ruckus Fatty Rim CUSTOM With Kymco Hub and Cap”

There are no reviews yet.

You may also like…