The GY6 Intake Manifold Riser and angled clock flange all in one is here! V3 NOW COMES IN 30MM JUST IN CASE YOU HAVE A BIG BORE HEAD. No more 2-piece setups that need a gasket to seal. This Intake Manifold Riser can help you get a better fitment! This will give you all the clearance you need so you can run a forward-facing carb WITH THE CORRECT ANGLE and clears the cross-member bar! The best part yet is now you don’t have to cut the plastics!
Includes All Stainless-Steel hardware the GY6 head only and for the GY6 manifold! Also included is Gasket instead of O-Ring. We HIGHLY recommend you use PEMATEX ULTRA BLACK RTV (ULTRA DOES NOT BREAK DOWN WITH GAS) on the gasket. FILL in O-Ring area with RTV and BOTH sides of the gasket install and let fully cure before test ride. This is for 28mm or 30mm manifolds only.
- M6X60 CONNECT FLANGE TO HEAD.
- 6X40MM ARE TO CONNECT 28-30MM AFTERMARKET MANIFOLD TO CLOCKING FLANGE.