TRS R6 Under Seat Mount Smoke Taillight w/ Intergrated signals
In stock
$55.00
In stock
Swap your stock Ruckus Light with this Smoked Taillight with Integrated Blinkers.
Comes with Hardware and Mounting Bracket in USA Stainless Steel NOT Chinese
You may need in line load equalizer for turn signals to flash.
LED light color: Taillight is red, turn signals are amber
Voltage: 12V
Lens Color: Smoke
Dimension: 6.5 x 3.3 x 1.3inch /16.5 cm x 5.1 cm x 4cm (W x H x D)
Fitment: Honda Ruckus / Zoomer all years.
*Wire modification required on scooter/light. This unit is for a R6 the plug needs to be cut or use wire taps to work on your ruckus. Unit will not flash without flasher. If you get this, you may need a LED RELAY FLASHER or 1 SET of INLINE RESISTOR for the LED blinkers to work. 1 or the other but not both.
HONDA Ruckus OEM wiring to R6 Wires
- OEM Orange wire to R6 Yellow Wire = Right Blinker
- OEM Light Blue Wire to R6 Blue Wire = Left Blinker
- OEM Green/Black Wire to R6 black Wire = Ground
- OEM Black/Brown Wire to R6 White Wire = Running light
- OEM Green/Yellow Wire to R6 Red Wire = Brake light
Electrical items are non-returnable, please check photos and specifications before ordering. Please see our Warranty & Return Policy.
| Weight | 0.6875 lbs |
|---|---|
| Dimensions | 8 × 4 × 4 in |
Based on 1 review
Add a review
You may also like…
Related products
-
49cc Honda Exhaust, Engine Performance, Gy6 150cc, Ruckus
Exhaust studs for GY6 150cc and Honda 49cc engine M6
49cc Honda Exhaust, Engine Performance, Gy6 150cc, RuckusExhaust studs for GY6 150cc and Honda 49cc engine M6
Exhaust studs for GY6 150cc/125cc,QMB139, & Honda 50cc engines . M6 can be used on both 49cc and 150cc gy6 . HONDA 49cc use 6mm and most stock gy6 use 6mm as well. Big Bore Heads usually use M8.
SKU: 148-118
KiaFab –
Very nice and bright. Needed resistors but I got them along with the R6. It was good they sell them separately because if I already had them I would be for something I don’t need. Good call guys
KiaFab –