ALL IN ONE GY6 Manifold riser angled clocking flange 56mm BLACK

The GY6 Intake Manifold Riser and angled clock flange all in one is here!  28MM Opening .This Intake Manifold Riser can help you get a better fitment! This will give you all the clearance you need so you can run a forward-facing carb WITH THE CORRECT ANGLE and clears the cross-member bar!  You will have to cut your plastics to make fit as shown in the video.  This is as simple as placing on top and using a box cutter or dremel tool. 

Includes All Stainless-Steel hardware the GY6 head only and for the GY6 manifold! We HIGHLY recommend you use PEMATEX ULTRA BLACK RTV (ULTRA DOES NOT BREAK DOWN WITH GAS) on the gasket. FILL in O-Ring area with RTV and BOTH sides of the gasket install and let fully cure before test ride. This is for 28mm or 30mm manifolds only.

• M6X55 CONNECT FLANGE TO HEAD. We recommend removing the black plastic piece on the head it’s just 1 more spot for a vaccum leak. If you choose t use it you will need to order longer M6X60MM Socket Cap x 2
• 6X40MM ARE TO CONNECT 28-30MM AFTERMARKET MANIFOLD TO CLOCKING FLANGE.
• Made from 6061 Billet Aluminum.

If you do not want to cut the plastics or have a big bore kit with a 30mm manifold we highly recommend the All in one V3 All in one clocking Flange.