, , ,

Polished Douglas 12×8 3+5 4/110 Solid Ruckus Fatty Rim for GY6


Out of stock


Out of stock

Join the waitlist to be emailed when this product becomes available

PLEASE READ: The wheel Manufacture DWT aka Douglas, makes these wheels for ATV applications and they are SPUN 6061 .190 aluminum. These are NOT forged wheels and lips of the wheel may show some up and down movement. This is due to wheels being Hand Spun using a machine from DWT. We take EACH wheel and then placed on our in-house CNC machine to find center with both a CNC Probe and laser. WE DO THIS ON EVERY WHEEL THAT WE CUT A DESIGN INTO. We do not just put wheel in cnc machine and cut design like others. Each and every wheel has a different center since they are spun. Each wheel then gets lip edge polished since DWT just puts them in a box with NO protection and ships them to vendors. Wheels come with ends scratched some more than others. We polish front edge where it would lay on both sides, Rear on right side only. Why are our wheel more? We take the time to center the wheel before it’s cut, polish edge of wheel, and repack in protective foam.

Douglas 12×8 3+5 Offset with 4/110 bolt pattern. Rim comes with a TRS center hub cap to hide axle nut.
We fully polish the rim because factory is just not good enough.

The TRS Center cap is mounted from behind the rim and matched honed from behind to hold cap flush between the hub and the wheel.

Must use an GY6 TRS, DANMAXX hub or similar. This wheel is for Ruckus with GY6 Conversion

Weight 8 lbs
Dimensions 13 × 13 × 13 in

Based on 0 reviews

0.0 overall

Be the first to review “Polished Douglas 12×8 3+5 4/110 Solid Ruckus Fatty Rim for GY6”

There are no reviews yet.

You may also like…


error: Yes! Content is protected!