PLEASE READ: The wheel Manufacture DWT aka Douglas, makes these wheels for ATV applications and they are SPUN 6061 .190 aluminum. These are NOT forged wheels and lips of the wheel may show some up and down movement. This is due to wheels being Hand Spun using a machine from DWT. We take EACH wheel and then placed on our in-house CNC machine to find center with both a CNC Probe and laser. WE DO THIS ON EVERY WHEEL THAT WE CUT A DESIGN INTO. We do not just put wheel in cnc machine and cut design like others. Each and every wheel has a different center since they are spun. Each wheel then gets lip edge polished since DWT just puts them in a box with NO protection and ships them to vendors. Wheels come with ends scratched some more than others. We polish front edge where it would lay on both sides, Rear on right side only. Why are our wheel more? We take the time to center the wheel before it’s cut, polish edge of wheel, and repack in protective foam.
305’s 2-PIECE GY6 WHEEL SET
- FRONT DWT BARREL 12X4 2+2 OFFSET 4X90 BOLT PATTERN 2 PIECE DESIGN
- REAR DWT BARREL12X8 3+5 OFFSET 4/90 BOLT PATTERN 2 PIECE DESIGN
- FULLY POLISHED ON MACHINE (WE POLISH THEM FACTORY POLISH JOB IS NOT GOOD ENOUGH)
MUST USE A 4/90 GY6 HUB ADAPTER.
*REAR HUB ADAPTER SOLD SEPARATELY BY CLICKING HERE.
*FRONT HUB ADAPTER SOLD SEPARATELY BY CLICKING HERE.