Axle spacer kit for aftermarket wheels and hubs
RRGS / NCY FRONT HUB SPACER KIT THIS KIT IS TO CENTER WHEEL FOR AFTERMARKET FRONT HUB NORMALLY USED WITH DOUGLAS, OR OTHER RUCKS WHEELS. YOU MAY HAVE TO ADD (USING WASHER) OR REMOVE (FILE) A COUPLE THOUSANDTH OFF THE SPACER AS WE HAVE NO CONTROL OVER HOW FAR THE MANUFACTURER PRESSES THE BEARING IN THE HUB.
- 1 X CALIPER SIDE SPACER LONGER OF TWO.
- 1 X SPEEDOMETER SIDE SPACER (SMALLER
- 2 X CALIPER SPACERS2
- 2 X STAINLESS STEEL M8X1.25X30MM
- 2 X STAINLESS WASHERS TO ADD SPACER IF NEEDED.
NOTES: Depending on the front wheel you have you may need to use m8 washers in place of the 2 small spacers that are included. This will depend on if your front wheel has a recess cut for the hub or not.
Be the first to review “Axle spacer kit for aftermarket wheels and hubs”