SPECIAL BLACK EDITION This is the carb everyone is using on GY6 swaps on their ruckus. Great for your 170cc-200cc GY6 motor. Suggested settings: Run air screw all the way in then back out 1/2 turn. Pull Needle E clip and set on the lowest setting on the needle. May need to adjust needle height. Recommend 32 Idle jet and 115 or 120 main. Select either 28mm or 30mm
BE SURE YOU GET THE JETS Usually 32 or 35 Idle and 115 or 120 main.
Correct Slide Cable is needed.
The product that you are purchasing is designed and intended for closed course competition use only and is labeled as such, i.e. Yoshimura “RACE SERIES.” Yoshimura RACE SERIES , Carburetors, Intakes, or any other performance products are neither designed nor intended for use on PUBLIC ROADS or LAND. Such use is prohibited by Federal and State regulations. By Placing order and agreeing to the Terms and Conditions at CHECK OUT you acknowledge that the item being purchased is for racing only and this vehicle will never be used on public roads or land.
GY6 CVT Belt Drive 842-20-30
Honda Ruckus / Met 3D Printed Carbon Ignition Cover
GY6 8 coil Pole Stator AC
GY6 / GET Motor flywheel puller
12MM X 250MM neochrome front axle for Honda Ruckus disc kits
Relay and Starter Solenoid; GY6 




















There are no reviews yet.