Looking to get more POWWWER out of your GY6 swapped Ruckus or GY6 powered Motor. TRS has a complete bolt on kit just for you with everything you need. We even installed the Throttle cable and jet the carb for you. Your Choice of NCY or TAIDA Brand.
Included in the kit is as follows:
- TAIDA 61mm Drop in Cylinder with Forged Piston
- TAIDA Big Valve Cylinder Head
- OKO 30MM PWK SLIDE CARB
- 78″ SLIDE CARB CABLE INSTALLED
- 115 MAIN JET AND 32 IDLE INSTALLED
- 30MM POLISHED MANIFOLD
- ALL IN ONE CLOCKING FLANGE / RISER
- A9 CAM
Choose your brand of Big Bore Kit and all of the rest of the parts are the same. We have taken the liberty of installing the throttle cable and the jets for you. BEST OF ALL IT SHIPS FOR FREE
Don’t forget to upgrade your Clutch and Variator to get the most out of your Big Bore Kit. See related items below.
Disclaimer: We have this kit on our personal WELL MAINTAINED ruckus and go 75 MPH with a 200 pound rider. Every Scooter is different and results will vary. Carb is jetted for Sea-level applications. Needle C Clip is set at the Middle but may need to be dropped for better Mid Range. Idle Air Screw is set at 1/2 turn out. Parts should be installed by a trained motorcycle or Scooter Technician. TRS does not work on motors at our retail shop and can only offer tech support on carb settings. PLEASE make sure you have the skill or knowledge or know someone that does before ordering these parts. TRS makes no warranties, implied or otherwise towards the performance of these kits nor warranty on any part of these kits as they are performance parts.