This CVT kickstand design is made for your Lowered Honda Ruckus (all years) or Honda Metroplitan (2002-2009) with ruckus swingarm mod, must use with Aftermarket CVT cover/plate/anklebiter. Allow for tighter turn on lowered scooters or if you are using a rear foot brake set up.
Can be used on 49cc GET motor or 150+ Gy6 motor swaps. Simple from the outside yet in contains a spring-loaded ball bearing locking mechanism on the inside. Kickstand has a REAL foot not just a bolt to prevent tip over. Powder Coated Gloss black and Made 100% in America with American Hardware.
Caution: Turn Off motor completely before lowering kickstand making sure feet/ankles/hands are free from Cltuch bell.
DO NOT SIT ON SCOOTER WITH KICKSTAND DOWN. THIS WILL CAUSE YOUR CAST ALUMINUM CVT BOLT HOLE TO BREAK.
- On GET motor the kickstand goes on top of the GET anklebiter / CVT cover ( see pic)
- On GY6 motor if you have regular Anklebiter / CVT cover 4 bolt this is go on the bottom 2 hole towards the clutch (See Pic)
- On GY6 motor if you have Ultimate Anklebiter / CVT cover 4 bolt this is go on the bottom 2 hole towards the clutch but you will need to grind or cut 1/4 inch off 2 off the spacer (See Pic)