, ,

Genuine OKO BLACK EDITION 28 or 30mm GY6 slide Carb PWK Tawian


In stock


By submitting your payment, you agree to our terms and conditions.

SPECIAL BLACK EDITION This is the carb everyone is using on GY6 swaps on their ruckus. Great for your 170cc-200cc GY6 motor.  Suggested settings: Run air screw all the way in then back out 1/2 turn.  Pull Needle E clip and set on the lowest setting on the needle. May need to adjust needle height. Recommend 32 Idle jet and 115 or 120 main. Select either 28mm or 30mm

BE SURE YOU GET THE JETS Usually 32 or 35 Idle and 115 or 120 main.

Correct Slide Cable is needed.

The product that you are purchasing is designed and intended for closed course competition use only and is labeled as such, i.e. Yoshimura “RACE SERIES.” Yoshimura RACE SERIES , Carburetors, Intakes, or any other performance products are neither designed nor intended for use on PUBLIC ROADS or LAND. Such use is prohibited by Federal and State regulations. By Placing order and agreeing to the Terms and Conditions at CHECK OUT you acknowledge that the item being purchased is for racing only and this vehicle will never be used on public roads or land.

Weight 1.0625 lbs
Dimensions 7 × 5 × 3 in
Carb Size

OKO 28mm, OKO 30mm

Based on 0 reviews

0.0 overall

Be the first to review “Genuine OKO BLACK EDITION 28 or 30mm GY6 slide Carb PWK Tawian”

There are no reviews yet.

You may also like…


error: Yes! Content is protected!