GY6 Fatty Tire Hugger Rear Fender with Genuine Yamaha Fender V2
In stock
$59.99 – $99.00
Do you have a GY6 swap Honda Ruckus and tired of getting water on your back when you get caught in the rain? We have made a Rear Fender Mount with a Genuine Yamaha R1 fender. Mount is made in USA out of Stainless steel and TIG welded. Our newest version has a gusset welded next to motor bushing.
Installation: Mounting hole on GY6 you must drill out the threads since Stainless bolt provided is only partial threaded. Use locking nut to secure. They do not make a stainless bolt that is fully threaded. THIS IS ONLY FOR FATTY WITH GY6 motor swap
Comes in 2 options
-
- Complete with Genuine Yamaha R1 Fender and Hardware
- Stainless Bracket and Hardware only
*Picture of bracket installed is on a 12×8 if you have 12×7 tire will be fatter and fender will sit higher since tire will not allow you to put angle as much
| Weight | .625 lbs |
|---|---|
| Dimensions | 6 × 6 × .25 in |
| Rear Hugger Fender | Bracket and Hardware only (NO FENDER), Complete with Fender and Bracket |
You may also like…
Related products
-
Engine Performance, Gy6 150cc
CDI Unit (Replacement) GY6
AC CDI for GY6 Engines, as seen in photo. A typical CDI module consists of a small transformer, a charging circuit, a triggering circuit and a main capacitor. First, the system voltage is raised up to 400-600 Volts by a transformer inside the CDI…
SKU: 0900-1044 -
49cc Honda Exhaust, Engine Performance, Gy6 150cc, Ruckus
Exhaust studs for GY6 150cc and Honda 49cc engine M6
49cc Honda Exhaust, Engine Performance, Gy6 150cc, RuckusExhaust studs for GY6 150cc and Honda 49cc engine M6
Exhaust studs for GY6 150cc/125cc,QMB139, & Honda 50cc engines . M6 can be used on both 49cc and 150cc gy6 . HONDA 49cc use 6mm and most stock gy6 use 6mm as well. Big Bore Heads usually use M8.
SKU: 148-118
