TRS GY6 Extension Mount Kit – Fatty GY6 SOLID 12X8 10X8 OR 12X7

 Ruckus gy6 conversion mount. Allows you to run the 12x 7, 12×8 or 10×8 Fatty rim. . Carb must face forward. Our mount is a SOLID piece of BILLET ALUMINUM 6061-T6 so it’s super strong.  We suggest an angled clocking flange if you are going to use a 24mm Gy6 carb or if you are using a 28mm or 30mm OKO you will need an ALL IN ONE CLOCKING Flange to raise the carb higher so the float bowl clears the motor. Brackets are stainless steel.

See pics for installation orientation. Feel to click on this video to see how to install same style mount.

Should start at 11:11 mark His powder was too thick but he fixed.

LOOKING FOR EXTENDED BRAKE CABLE THE 6 EXTENDED CABLE WORKS PERFECT WITH LOWERED BARS.

The Kit comes with a 1/2 spacer and 2 x 1/4 spacer. Depending on your shock you can install the spacer to right of the shock or in the middle of the two 1/4 spacers as seen below.